ATEX Safety Thermostats TS Series
Thermostat with liquid expansion probe with manual reset and positive safety for capillary breakup, especially suitable for boilers, heating systems and in all applications where it is necessary not to exceed the maximum temperature set in hazardous areas.
Description
The temperature probe is protected by an internal explosionproof sheath as well as by an external watertight sheath which induces a greater thermal inertia of the thermostat that raises the temperature reading of the controlled fluid. It’s advisable to carry out tests on the adjustments to minimize this effect.
– Its design allows the rapid replacement of the control unit without having to empty the process fluids containers.
– External sheath in AISI 316L Stainlees Steel.
– Plate and external screws in Stainless Steel.
TECHNICAL DATA
Marking:
II 2G Ex d IIB+H2 T6-T5 Gb
II 2D Ex tb IIIC T85°C-T100°C Db
Certificate: EU-Type Examination Certificate
Housing: Aluminum light alloy. External epoxy RAL 7000
Operating temperature:
-20ºC to +40ºC (T6/T85ºC)
-20ºC to +60ºC (T5/T100ºC)
Operating conditions: Indoor / Outdoor
Ingress protection: IP65
Cable entries: 1×3/4” NPT (cable gland not included)
Additional information
| Certified for use in: | Zone 1, Zone 21 |
|---|
