Compact and rugged connector designed for all types of aggressive environments (humidity, corrosion, pollution) found in many industrial hazardous areas.

The 5 contacts connection can meet all needs and applications such as lighting.

This connector is both quickly assembled and put into service. Its locking ring resists vibration thus preventing accidental disconnection of the plug on load.

The technically advanced silver-nickel butt contact system assures next level performance no matter the conditions.

The connector guarantees a long-lasting and electrically efficient connection for your industry.

Can be used in:
II 2GD
Ex e IIC T6 Gb
Ex tb IIIC T72°C Db
Zones: 1, 2, 21, 22.

 

Download Product Data Sheet - Inpratex

Marking:
II 2GD
Ex e IIC T6 Gb
Ex tb IIIC T72°C Db
Certificate: EU-Type Examination Certificate
Operating conditions: Indoor / Outdoor
Housing: Glassfibre reinforced thermoplastic UL94 V-0
Butt contacts: Copper alloy with silver-nickel tips
Contact protection: Tinning
Load cycles: More than 2000 cycles
Shock resistance: IK08
Vibration:
Frequency 5-1000Hz, 1g (90 minutes on each critical frequency)
According to IEC 6068 2-6
Impulse withstand voltage: 5 kV / Pollution degree 3
Contact resistance: <2mΩ
Permited current range: 4-20 mA / 5 A
Ductrs accepted: From 0,75 mm2 to 2,5 mm2 Mechanical terminals
Cable diameter: From 7 to 14 mm
Operating temperature: -20ºC to +70ºC
IP protection Socket with cap: IP66/IP67 | IP69K 100 bar (1450 PSI) 80ºC
IP protection connected plug: IP66/IP67 | IP69K 100 bar (1450 PSI) 80ºC
Resistance to fluids: Motor oils, petrol, fats, detergents

Product Information Request:
Use the form below to request information about our ATEX products:

Name / Company (required)

e-mail (required)

Product Name

Message

You may also like…