Non-sparking tool range made of Copper-Beryllium (Cu-Be) or Aluminium-Bronze (Al-Bron) alloys, suitable for use in potentially explosive atmospheres. These Non-sparking are certified by the BAM Certification Body, stating that the materials from which they are made are suitable for use in potentially explosive atmospheres, in zones 1 and/or 21 of all explosion groups (I, IIA, IIB and IIC).
– Non-sparking tools can not reach the hardness of conventional tools. For this reason, special care must be taken when using them, avoiding heavy stress and high temperatures.
– If for all wrench/screwdriver it is imperative to use the size corresponding to the nut or screw, in the case of anti-spark spanners is even more so, since if a wrench/screwdriver of a different size is used improperly, the shearing effect that would be caused, would lead to its deterioration.
– The use of anti-spark tools should not be the only preventive measure in areas where they are designed for this purpose. Other objects, such as clothing or other materials must also be suitable for anti-spark applications.
IMPORTANT CONSIDERATION:
The hardness and resistance that can be achieved with the materials used to manufacture non-sparking tools is significantly lower than that which can be obtained in tools made of steel. Due to these special characteristics of the material employed, non sparking tools can not be guaranteed against any deformation or breakage. Non sparking tools will be replaced under guarantee only when the hardness of the damaged tool does not reach (or exceeds) the one indicated in our catalogue: 283-365 Brinell for those made in copper-beryllium and 229-291 Brinell for those made in aluminum bronze.
MONDAY TO THURSDAY: 8h – 18h
FRIDAYX: 8h – 14h
AUGUST: 8h – 14h
© Inpratex Atmósferas Explosivas, S.L. CIF: B75003574 | Nº R.I. Productor AEE 4016.
